RC Planes

per page
Items 97 to 128 of 795 total Page:
  1. Previous Page
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next Page

Grid  List 

Set Ascending Direction
  1.  
    Arrow Sport

    Arrow Sport

    $27.95

    Description:This R/C sport-and-pattern trainer resembles a scale, mid-wing aircraft from the Golden Age. The design by Don Carkhuff features
    Additional Information: balsa/ply construction and a symmetrical airfoil. WS: 65 in.; L: 52 in.; engine: .40 to .60; 4 channels; 1 sheet;
    Difficulty Level: LD3
    Learn More
     
  2.  
    AEROMARINE EO SPORTS BOAT

    AEROMARINE EO SPORTS BOAT

    $27.95



    (flying-boat biplane) Designed by Larry Cressman and inked and detailed by Dick Sarpolus, this highly unusual design is one of a kind. It is a flying boat biplane that uses conventional balsa and plywood construction and is intended for 30cc gasoline engines for power. It has plug-in landing gear so it can be flown from both ground and water. Just be sure to waterproof the fuselage/hull.

    Span: 91 in.; length: 65 in.; Engine: 30cc gas; LD: 2; 3 Sheets;
    Learn More
     
  3.  
    Skeeter

    Skeeter

    $27.95

    Description:An unusual but appealing semi-scale, electric-powered sport version of the deHavilland Mosquito bomber. Hal deBolt's design uses the latest building techniques to ensure a great-flying, electric-powered model.
    Additional Information: This scale version of the '30s light plane flies well. The easy-to-build design by F. Ramos features an all-balsa framework that's great for CO2 power. WS: 24.325 in.; L: 17 in.; Engine: CO2; 2 sheets.
    Difficulty Level: LD2
    Learn More
     
  4.  
    Standard J-1 Biplane

    Standard J-1 Biplane

    $27.95



    Designed by master model designer and builder Pat Tritle, this 1/9-scale classic barnstorming biplane is a great flyer. It has a lightweight backyard flyer design that¿s also IMAA legal. It uses traditional stick and former construction with laminated outlines for wingtips, rudder, stabilizer and elevators. Plastic parts are available from the author (see plans to order).

    Span: 60 in Power: brushless outrunner; Radio: 4-channel; LD: 2; 3 Sheets; $24.95
    Learn More
     
  5.  
    Aeronca Chief

    Aeronca Chief

    $27.95



    Designed by Pat Tritle, this model draws from old time stick-and-tissue construction and includes modern and efficient electric power to make a great lightweight scale flyer. 4-channel control gives it excellent performance. Span: 53.7 in., Length: 30.75 in.; Power: Himax 2812-0850 brushless motor; LD:2 ; 3 sheets; $24.95
    Learn More
     
  6.  
    Curtiss Jenny

    Curtiss Jenny

    $27.95



    Designed by Pat Tritle, the Curtiss Jenny is an IMAA-legal, sport-scale park flyer designed for low-cost brushless power. The model is of ¿stick frame¿ all wood construction with available plastic detail parts. WS:50in.; area: 712 Sq. in.; weight: 22.6 oz; Power: 1000KV motor; Radio: 4 channels; LD:2; 3 sheets. $24.95
    Learn More
     
  7.  
    Convair 440 / C-131 Samaritan Transport
    Designed and built by Geiyer “Andy” Anderson, the Convair 440 / C-131 Samaritan Transport is an excellent flying sport scale twin designed around a pair of O.S. .32 2-stroke glow engines. The Samaritan uses traditional balsa and lite-plywood construction and is designed to use off-the-shelf retracts and shock absorbing struts from Robart Mfg. The wing is equipped with flaps and uses a pilot friendly semi-symmetrical airfoil.
    Span: 82in.; Length: 65in.; Power: twin .25. - .32 glow engines (or similar electric power.); LD: 2; 3 Sheets;
    Learn More
     
  8.  
    F-106 Delta Dart

    F-106 Delta Dart

    $27.95

    Designed by Dan Savage, this highly unusual Electric Ducted Fan (EDF) powered Jet is sport scale but it includes a fully-cambered airfoil, reflex training edge and scale leading edge droop. Featuring basic wood and lite-ply construction used throughout, it has excellent flight performance. As with all Delta- wing airplanes, it has very good slow speed performance. Designed to use a 70mm EDF unit and retracts, the Delta Dart also has a laser-cut short kit and a step by step guide available from the author at: www.savagelight.com

    Wing Span: 28"; Length: 49-1/2"; Radio: 3 Channels: Throttle, Elevator/Ailerons (w/Elevon mix); Power: WeMoTec Minifan 480/Kyosho AP-29L hybrid; LD: 2; 3 Sheets
    Learn More
     
  9.  
    Prime Cut +20

    Prime Cut +20

    $27.95

    Designed by Dick Sarpolus, the Prime Cut +20 is his latest sport-flying giant scale design. It is easy to build and fly, has aerobatic performance and can use engines in the 40cc to 50cc gasser range. Construction is basic, built-up balsa and plywood with plug-in wing panels on a strong aluminum tube spar/joiner. The canopy section is built as part of the fuselage so no separate molded plastic canopy is needed. Thick airfoil makes landings easy.
    Span: 90 in.; Length: 68 in.; Weight: 14.5 lbs.; Power: 45cc gas engine; Radio: 4-channel; LD: 2; 3 Sheets
    Learn More
     
  10.  
    Fleet Model-2 Biplane

    Fleet Model-2 Biplane

    $27.95

    Designed by Pat Tritle, the 1/8-scale Fleet Model-2 Biplane is a classic multi-wing 2-seater trainer from the Golden Age of Aviation. The model uses stick and tissue balsa and lite-ply construction and it is very scale in outline. It includes the airfoiled-shaped horizontal stabilizer and plans show the standard tail outline but the model can be easily modified to produce other variants of the Fleet Biplane.
    Wingspan: 42 in.; Length: 32 in., Weight: 18 oz.: Power: Park 400 Outrunner; Radio: 4-channel; LR: 2; 3 Sheets
    Learn More
     
  11.  
    F-4 Phantom II

    F-4 Phantom II

    $27.95

    Designed by Dab Savage, this electric ducted fan looks like a scale jet but flies like a sport model. It uses traditional balsa, ply and lite-ply construction and is intended for 90mm or 3.5-inch EDF fan units and 900 to 1500 watt power systems. If you can build a sport plane you can build this F-4. It is intended for intermediate to expert pilots.
    Wingspan: 50 1/2 in.; Length: 33 5/8 in.; Radio: 4-6 channels; Power: 90mm EDF unit (900-1500W); LD:2; 3 Sheets;
    Learn More
     
  12.  
    Ford Trimotor

    Ford Trimotor

    $27.95

    The Ford Trimotor designed by Pat Tritle uses lightweight stringer and former construction and there is a laser-cut wood parts package available from the author. It is powered by three brushless outrunner motors and a single 2s Lipo pack. It is intended for intermediate builders and flyers.
    Span: 46.7”; Length: 31.75”; Power: 3x 250size outrunners; Radio: 4-channel; LD: 2; 3 Sheets
    Learn More
     
  13.  
    Grumman G-164 Ag Cat

    Grumman G-164 Ag Cat

    $27.95

    Designed by Pat Tritle, the Grumman G-164 Ag Cat is a 1/12-scale crop duster biplane that’s built light and strong. It is ideal for smaller flying areas and is very stable and easy to fly. A plastic and laser-cut wood parts kit is also available from the author.
    Span: 42.3in.; Length: 27.4in.; Power: 400 – 450 Brushless motor; LD: 2; 3 Sheets
    Learn More
     
per page
Items 97 to 128 of 795 total Page:
  1. Previous Page
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next Page

Grid  List 

Set Ascending Direction