Air Age Store

This easy-to-build boat has a cardboard hull. The cardboard is folded and then glued into shape, then it's covered with fiberglass cloth and resin. The very basic plan consists of flat templates on a full-size sheet. No running hardware or motor detail is included. Use your favorite setup. Length: 25"; beam: 9"; power: .05 to .40 electric motor; 1 sheet. LD1
Learn More

Designed by Clark Salisbury, the stylish TwinSkimmer is a great little electric-powered sport boat for relaxed running.Construction is mainly of balsa sheet, and there's a little lite-ply; all the parts are shown on the plan with full-size patterns. Power it with one or two motors. LD1
Learn More

Designed by Pat Tritle, Miss Chloe is a model of a live steam launch vessel with a great basic design to which you can add as much or as little detail as you'd like. It features traditional construction techniques, with a hull built of lite-ply planked with balsa and a deck built of balsa planked with hardwood. A short kit is also available from Teccut.

• Type: live-steam launch
• Hull Length: 26 in.
• Beam: 7.5 in.
• Motor: 7.2V Speed 400 w/10A ESC w/BEC
• Prop: 2-blade, 35mm prop
• Battery: 6-cell, 1300mAh Ni-Cd
• Radio Req'd: 2-channel w/1 microservo
• Difficulty Level: 2
• Sheets: 3

Learn More

Designed by Jay Turner, the XS-Cat is an easy-to-build, foam-and-wood catamaran that's perfect for 05 motors. The well-detailed plans feature full-size templates and all motor and hardware details. The foam sponsons are covered with 1/32-inch-thick plywood and glued to the built-up wooden-hull center section. The bottoms of the sponsons have "wedges" to increase lift (and speed!). Length: 25"; beam: 9"; power: 05 motor; channels: 2; 1 sheet. LD2 Learn More

A state-of-the-art electric-powered racing catamaran designed for maximum performance in the 6-cell ROAR stock hydroplane class. The model is built of balsa and foam to meet a minimum weight goal (few R/C race boats are this lightweight), and few in its class will run faster on an oval racecourse. Length: 18"; beam: 8 1/4 "; weight w/battery: 30 oz; battery: 6x1400 SCR; prop: Octura P735 (or X432, X435, Y535); LD2; sheet: 1. LD2
Learn More

This Clark salisbury design combines unique looks with good handling to create a boat that is easy to build and fun to drive. Made from balsa and ply, the PondSkimmer III is an uncomplicated model that will never fail to turn heads. Length: 211/2in.;power: .05 electric; radio req's: 2 channel; 1 sheet  Learn More

Dave Frank's electric-powered hydro has a record-setting design. It's built of balsa and thin plywood. The plans contain full-size patterns and show the scale paint scheme. Length: 28 1/4"; beam: 13 3/4". (not including rudder and strut). Hughey running gear is shown on the plans. 1 sheet. LD2
Learn More