Scale

per page
Items 1 to 8 of 12 total Page:
  1. 1
  2. 2
  3. Next Page

Grid  List 

Set Descending Direction
  1.  
    Denise C Tug Boat

    Denise C Tug Boat

    $19.95

    Designed by Bruno Clozza, the electric-powered Denise C. tugboat is built to a scale of 1/2 inch to 1 foot using "bread-and-butter" wood construction utilizing 1/4-inch-thick pine lifts. The plans show all the hull and station lines, and the drawings show all the full-size details. No model details are shown, and hardware installation is left to the modeler's discretion. Length: 31 3/8"; beam: 11"; channels: 2 or more. LD3
    Learn More
     
  2.  
    WOF 7.5

    WOF 7.5

    $19.95

    Designed by national champion Jerry Dunlap, the WOF 7.5 is a larger version of Jerry's popular WOF 3.5 tunnel and uses the same quick and easy wood-over-foam construction technique. Construction-grade foam, 1/32-inch-thick plywood sheeting and 1/8 inchplywood are the basic ingredients for this high-performance tunnelhull racer. Length: 32 in.; beam: 12 in.; radio req'd: 2-channel; 2 sheets. LD2
    Learn More
     
  3.  
    The Orca Fishing Boat

    The Orca Fishing Boat

    $19.95

    The Orca Fishing Boat
    Build the fishing boat from Jaws!

    Designed by Pat Tritle, the Orca is a great scale model of the famous fishing boat from the movie "Jaws"! Traditional balsa and lite-ply construction is used throughout, and you can add unlimited scale detail!

    • Scale: 1/14-scale
    • Hull Length: 30 in.
    • Overall Length: 35 in.
    • Beam: 10 in.
    • Weight: 4 lb., 2 oz.
    • Motor: Dumas 6V high-speed motor with a Master Airscrew 3.5:1 reduction drive
    • Prop: 44mm, 3-blade Graupner
    • Battery: 2000 mAh, 6 cell Ni-Cd pack
    • Run Time: about 1 hr. at 3/4 throttle
    • Radio Req'd: 2 channels (rudder and throttle)
    • Difficulty Level: 2
    • Sheets: 2
    Learn More
     
  4.  
    The Caito Bros. Scale Fishing Trawler
    Designed by Bryant Thompson, the Caito Bros. trawler "drag" boat is a scale, working model of the full-size fishing boat that works the waters of Noyo River, Ft. Bragg, CA. The model is made of balsa, plywood, basswood and mahogany using plank-on-frame building techniques. All the drive gear is available from Midwest Products, and the plans show full-size patterns, detail views and the placement of the motor and the shaft. Length: 33.25"; beam: 9.125"; motor: 6V to 12V; 2 or more channels; 2 sheets. LD2
    Learn More
     
  5.  
    Marie L. Hanlon Tugboat

    Marie L. Hanlon Tugboat

    $19.95

    This Bryant Thompson design uses conventional plank-on-frame construction with ply and balsa. The plan features many tips and techniques on scale details that really make this craft something special, including mahogany grating and rail caps,authentic-looking window and door frames and much more. Length: 36 in.; beam: 9 1/2 in.; power: one 12V motor; radio req'd: 2-channel; 2 sheets; LD 2. 
    Learn More
     
  6.  
    Hughie B.

    Hughie B.

    $19.95

    Designed by Pat Tritle, the Hughie B. is an easy-to-build workboat that uses balsa and plank-on-frame construction. The aft deck hatch and the main cabin are removable to allow access to the radio, motor and battery pack, and using a 6-cell, 1200mAh battery pack, the model has a run time of more than an hour.Length: 30.25 in.; beam: 8.5 in.; radio: 2-channel; 1 sheet; LD 2.
    Learn More
     
  7.  
    Yodas Ark

    Yodas Ark

    $19.95

    Designed by Pat Tritle, this 1930s-style excursion boat is easy to build and has a lot of charm. Designed for two Speed 400 electric motors, the hull is constructed of balsa, and the decks are made of mahogany and obechi hardwoods.Many detail options can be added to suit the builder. Length: 26 1/2 in.; beam: 8 1/4 in. ; power: 2 Speed 400 motors; 1 sheet; LD2
    Learn More
     
  8.  
    WW II CAM Ship

    WW II CAM Ship

    $19.95

    Designed by Gifford E. Hamilton, this Catapult Aircraft Merchant (CAM) ship is built to a scale of 1/96. Based on a Sterling American Scout kit hull, the plans show all the scale fittings and superstructures needed to convert the original hull into theCAM ship. LD2

    Learn More
     
per page
Items 1 to 8 of 12 total Page:
  1. 1
  2. 2
  3. Next Page

Grid  List 

Set Descending Direction